It is important to measure the opening of the garage door properly. If you have a lift-up door, for instance, the opening will be a quarter inch smaller than the panels’ actual size. Place them first, and if necessary, use shims to level them out. You can also leave one side bare so that the track will fit properly. Once this is done, the track will be easy to install. weblink
You must also install an operator plate on both the wood and plastic doors. The bracket will then engage the arm that retracts or lowers the door. Some heavy components require blocking, so you may need to use angle iron to create braces for the motor mount. The operator plate should be at least six inches above ground level. Be sure to align the sensors. A laser level is useful for aligning the mounts. You need to install sensors on both sides of the door to ensure they are positioned in the correct position.
Most companies that sell garage doors will provide full service for installation. It is also better to opt for a torsion spring system rather than the standard torsion spring model, as this is safer to adjust. Torsion springs can be dangerous if the springs are under a high amount of tension. The right tool will prevent the springs from breaking. A professional installer will also install the door, as well as make any necessary adjustments.
Before installing the garage door opener, you should install a bracket to secure the carriage tube to the wall. The bracket is usually installed on the center of the door, two inches above the highest travel mark. The second mark should be aligned with the bottom edge of the header bracket. Secure the bracket with the appropriate fasteners. Then, attach the carriage and the motor compartment to the bracket. If you are planning on purchasing a garage door opener, make sure you choose one that has adequate height.
The cost to install a garage door is between $400 and $1,800. However, the cost will vary widely based on the material used and the style of the door. The bigger the garage door, the higher the cost of installation, while a smaller door is cheaper to install. A professional installation takes between two and four hours and will require at least one electrician to do it correctly. The opener cost can add $200 to $500 to the overall price of the installation.
If you are a parent of small children, you may want to consider a pinch-resistant door. These doors are specially designed to prevent fingers from getting caught between the garage door panels. You should also look for pinch-resistant brackets. Many manufacturers will include these in the garage door itself. These brackets will prevent cables from becoming loose or tangled with the panels. If you decide to install a new garage door, be sure to consider how much insulation it provides.
